Cobra KEROSENE is a highly-refined low sulfur hydrocarbon fluid. It is suitable for use as a fuel for portable space heaters and lamps designed to run on kerosene.

Cobra KEROSENE exceeds the requirements of Canadian specification CGSB-3.3-M99 Type No. 1-K for this purpose. Products meeting these requirements are often referred to as "1-K" Kerosene. Regular kerosene not meeting the Type No. 1-K requirements can have sulfur levels 100 times higher making such fuel unsuitable and potentially dangerous for use in portable space heaters and stoves.

Cobra KEROSENE is undyed and contains no other additives. It burns with a clean, soot-free and bright flame; therefore, reducing the tendency to form a crust on the wick. Excessive crust on the wick could lead to poor performance.

Cobra KEROSENE is not suitable for use as a fuel in catalytic and pressure appliances.

Meets or exceeds the following specifications: • CGSB-3.3-M99 Type No. 1-K

• CGSB-3.3-M99 Type No. 1-K

 (please refer to infotech sheet for current grades, sizes and part numbers)

Material Safety Data Sheet (MSDS)                     infotech sheet: Kerosene

Cobra UNISOLV is a hydrocarbon solvent designed to have a good balance of solvency and evaporation rate. It is primarily an aliphatic solvent, meaning that it contains a mix of paraffinic and naphthenic material along with some isomers and unsaturated olefins. It is a 3139 type solvent, with a boiling point range from about 310°F to 390°F (154°C to 199°C).

Cobra UNISOLV shows excellent solvency for all types of hydrocarbons, from heavy oils, greases and waxes to oil-based paints and inks.

Cobra UNISOLV can be used for general cleaning, de-greasing and ink preparation. It is ideal for thinning oil-based (alkyd) paints, as well as cleaning & softening brushes and rollers. It can be used to remove grease, oil, wax and tar from floors, and for cleaning engine parts, car bodies, fabrics and plastics, and many other uses.

Cobra UNISOLV should be treated with the same care as all chemicals. Avoid inhaling the vapours. Like all such solvents, Cobra UNISOLV can remove natural skin oil and fats, so avoid direct skin contact by using barrier creams or chemical-resistant gloves.

 (please refer to infotech sheet for current grades, sizes and part numbers)

Material Safety Data Sheet (MSDS)                     infotech sheet: Unisolv